Combo
You supply some parts we do the rest
Number of
Unique Parts
Fill in the exact quantity or 0 to wait for manually review.
Please enter the total number of single PCBs.(not the set number)
Number of
SMD Parts
Total quantity of SMD components for each board.
Number of
Through-Hole Parts
Total quantity of through holes components for each board.
Assembly Side(s)
Top side
Bottom side
Both sides
Are parts mounted on one side only, or both sides?
Conformal coating
Please contact your sales representative.
Select PCBgogo
PCB Order#
If you ordered pcb already on PCBgogo, you only need to select the pcb order number here so we can use the file from this pcb order to do stencil.
Detailed information
of assembly
Price does not include PCB fabrication or the cost of components, exact quotation will be updated after all the files you uploaded pass review or contact service@pcbgogo.com for help.
PCB Prototype
The above PCBs need assembly service
Thickness
0.203
0.305
0.508
0.813
1.524
Unit: mm
Thickness
0.254
0.338
0.508
0.762
1.524
Unit: mm
Different Design
in Panel
it means- we will charge extra panel costs when there are different
kinds in 1 PCB design. For same kinds, it needn't charge.
Size (single)
inch”↔mm
Inch”↔mm conversion
If you enter in units of inches and press the [Convert] button, it will be converted into units of millimeters in the quotation form.
Panel Way
Single piece
Panel by Customer
Panel by PCBgogo
The above panel way and panel size are for reference only which shall be subject to the review of our PCB engineer.
Panelization Detail:
Panel size:
0.00 X
0.00 mm
0 panels =
0 pcs individual PCBs
Image for panelized board ↓ (for reference only)
The final price will vary depending
on the paneling method and quantity.
The full board are by only one single board or be arrayed with the same or different PCBs
![pic](png/open-pic1.png)
Layers
1 Layer
2 Layers
4 Layers
6 Layers
8 Layers
10 Layers
12 Layers
14 Layers
FR4-TG
TG 130
TG 150
TG 170
S1000H TG 150
S1000-2M TG 170
Thickness
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.4
2.8
3.0
3.2
3.6
3.8
4.0
Unit: mm
Min Track/Spacing
3/3mil
4/4mil
5/5mil
6/6mil
8/8mil ↑
Min Hole Size
0.15mm
0.2mm
0.25mm
0.3mm ↑
0.8mm ↑
1.0mm ↑
No Drill
Solder Mask
Green
Red
Yellow
Blue
White
Purple
Black
Matte black
Matte green
None
Usually green color, the lead time will be longer if you choose other colors.
Gold Fingers
Yes
No
Bevelling
No
Yes (20°)
Yes (30°)
Yes (45°)
HASL with lead
HASL lead free
Immersion gold(ENIG)
OSP
Hard Gold
ENEPIG
Immersion silver(Ag)
None
*The above options are only Gold fingers Surface Finish
Thickness of
Immersion Gold
1U"=0.0254um
Au/Ni thickness
Au:10U"/Ni:120U"
Please choose other options of Gold /Nickel thickness here
1U"=0.0254um
Au:3U"/Ni:120U"
Au:5U"/Ni:120U"
Au:10U"/Ni:120U"
Au:15U"/Ni:120U"
Au:20U"/Ni:120U"
Au:25U"/Ni:120U"
Au:30U"/Ni:120U"
Please Enter | Au:
U"/Ni:
U"
Surface Finish
HASL with lead
HASL lead free
Immersion gold(ENIG)
OSP
Hard Gold
ENEPIG
Immersion silver(Ag)
None
Thickness of
ENEPIG
Ni:200U" / Pd:2U" / Au:2U"
Please choose other options of Au/ Pd thickness here
Ni:200U" / Pd:1U" / Au:1U"
Ni:200U" / Pd:2U" / Au:2U"
Ni:200U" / Pd:3U" / Au:3U"
Ni:200U" / Pd:4U" / Au:4U"
1U"=0.0254um
Thickness of
Immersion Gold
1U"=0.0254um
Au/Ni thickness
Au:3U"/Ni:120U"
Please choose other options of Gold /Nickel thickness here
1U"=0.0254um
Tick "Yes" to agree PCBGOGO to replace "HASL" to "ENIG" randomly because
of factory fabrication requirement.
Yes
No
Via Process
Tenting vias
Plugged vias
Vias not covered
Tips: If you use .PCB and .PCBDOC format file, we will fabricate the drills in PCBs as your selected options. This option is invalid if your file is Gerber file , as we will do according your Gerber file.
Finished Copper
1 oz. Cu
2 oz. Cu
3 oz. Cu
4 oz. Cu
5 oz. Cu
6 oz. Cu
7 oz. Cu
8 oz. Cu
9 oz. Cu
10 oz. Cu
Inner Copper
1 oz
1.5 oz
2 oz
3 oz
4 oz
5 oz
6 oz
+Additional Options
(Castellated holes ,Edge Plating ,impedance control, buried / blind vias,Custom Stackup,UL Marking)
Below options, their cost is not included in the online quotation
Peelable Soldermask
Coating material could be removed after board through wave soldering
Do not add PCB order number
Do not add PCB order number on board( extra +$1)
Half-cut/Castellated Holes
PTH holes or vias that are cutted through to create a partial or half hole to form an opening into the side of the hole barrel.Generally they are used for mounting a PCB to another one.
Edge Plating
The partial edge of the PCB plated with copper
Impedance control
The resistance to the flow of current, represented by an electrical network of combined resistance, capacitance and inductance reaction,usually in high-frequency circuits
Halogen-Free
Halogen-free PCB, it should have less than 900 parts per million of chlorine or bromine, with less than 1,500 ppm of total halogens.
Buried/blind vias
High-density multi-layer PCBs may have microvias: blind vias are exposed only on one side of the board, while buried vias connect internal layers without being exposed on either surface.
Custom Stackup
Apply to multilayer pcbs only.Stack-up refers to the arrangement of copper and insulating layers that make up a PCB before starting board layout design.
Carbon Mask
Carbon ink creates surface resistors and a protective contact surface for switches.
Via in pad
The microvias filled with non-conductive epoxy then capped and plated over
Via filled with resin
The microvias filled with epoxy
Countersinks/Counterbores
Countersink is a cone shaped hole in PCB for the tapered head of a screw. Counterbore is flat-bottomed hole and its sides are drilled straight down, usually used to fit a hex-headed cap or screw
Z-axis milling
A variable level elevation can be milled at the edge or within a circuit board. This is called Z-axis milling.
Confirm work file
work file is the Gerber file after PCBGOGO optimizes your PCB project, and we will have customers confirmed their work file, the lead time of your order will be counted by the time of work file confirmed
Other Special
Request
Your number will be added to the board. Kindly leave a note if you do not require this additional service.
CALCULATE
PCB Build time
For Rigid-Flex boards, the price will be showed and confirmed after review.
For Rogers boards, the price will be showed and confirmed after review.
Tell us more about your PCB&PCBA requirements or anything else you'd like us to know.
The price will be showed and confirmed after review.
Assembly Service Price
PCBA Lead time according to quotation list from our sales.
Shipping costs
UNITED STATES OF AMERICA
! temporarily out of service
3-7 Days | wt: 0.01 kg
CHN Time Zone(GMT+8):
2024/05/31 17:00:26
Payment before 2024/06/01 17:00
(GMT+8 Only PCB)
-
PCB Cost
$
-
Stencil Cost
$
-
Assembly Cost
$
-
Shipping
$
Total
Amount
Early Bird Discount -$7
Currency
-
$1 PCB Prototypes for New Users
- PCB Cost: $1
- Shipping: $0
Total discount amount: $1
Note: The final discounted total price is subject to review!
Register now!
This order is eligible for PCBGOGO’s preferential policy. Please contact the
sales representative or
service@pcbgogo.com.
Your target price($)
ADD TO BASKET
CALCULATE
The price is rough quote. If you need the accurate price with components cost, please register and upload the files.
The EUR and GBP prices are for reference only.
The final payment price is up to the PCBGOGO transaction exchange rate.